Oh lord, I'm so sorry hood. I wrote off that last reply about the gearing in a hurry on my phone and I didn't proofread. What I meant to write is as follows:
The gearing is 24 teeth on the x and y servos which mesh with 40 teeth gear on the ball screws.
On the z axis the gear on the servos is 24 teeth as well, but it meshes with a 40 tooh gear which in turn drives the 60 tooth gear on the ball screws. I think my math is correct.
Also, should I even pay attention to the encoder pulse count in the CSMIO plugin window? Will that tell me how many pulses per revolution the encoders have?