Hello Guest it is October 23, 2021, 06:07:54 AM

Author Topic: Win 7 and Win 10  (Read 1744 times)

0 Members and 1 Guest are viewing this topic.

Win 7 and Win 10
« on: August 24, 2015, 03:20:07 PM »
I am aware that it is a forlorn hope that Mach 3 will work with win 10 when expecting to drive motors etc.   Will mach 3 work in win 10 as it does now in XP and WIN 7 without connection to any ports?  I use my office computer (WIN 7) to verify tools paths etc, it has no connection from Mach to the outside world. It works well in this configuration. I would like to run Mach 3 in WIN 10, is there any hope of doing this?

An extra. Can a win 10 install be reversed to a previous win install?

Mike

Offline bowber

*
  •  216 216
  • Kirkby Stephen,Cumbria, UK
    • View Profile
Re: Win 7 and Win 10
« Reply #1 on: August 24, 2015, 03:46:21 PM »
Works on my win7 to 10 upgrade for testing code etc, no driver attached.

Steve