Hello Guest it is March 28, 2024, 12:45:51 PM

Author Topic: How to setup a NEMA23 brake on a servo controller  (Read 2338 times)

0 Members and 1 Guest are viewing this topic.

How to setup a NEMA23 brake on a servo controller
« on: April 30, 2007, 07:29:45 PM »
I'm trying to setup a nema23 brake on the z-axis to prevent it from
moving down when the power is turned off to the machine. The machine
is a Techno isel and the control I'm trying to setup is from a company
called camtronics. It is a servo system. Any help would be much
appreciated.

Thanks,
Alex