Hello Guest it is June 09, 2023, 09:23:21 PM

Author Topic: Spindle Speed problem  (Read 1559 times)

0 Members and 1 Guest are viewing this topic.

Offline GMcG

  •  22 22
    • View Profile
Spindle Speed problem
« on: June 30, 2015, 08:23:00 AM »
This is my first post so I am hopeful for some help.  I just encountered a problem with Mach 3 interface with my Precision Matthews PM 30 mill.  When I highlight the S DRO and type in any speed, the numbers appear in the DRO box but as soon as I hit the "enter" key the number changes to a -1 value. I haven't intentionally changed any configuration settings.  Any help would be appreciated.

Spindle Speed problem
« Reply #1 on: July 08, 2015, 06:58:18 PM »
Try return instead of enter...

Sent from my iPad using Tapatalk