Hello Guest it is August 20, 2019, 10:37:37 AM

Author Topic: Changing computer  (Read 1397 times)

0 Members and 1 Guest are viewing this topic.

Changing computer
« on: June 08, 2015, 01:16:26 PM »
Hi have been running mach3 on XP for 4years never any problems
Am going to put new computer onto newly built router
They all come with windows 7 or 8
Will mach 3 run ok on windows 7 or 8 ?
I think there used to be problems with vista
Colin

Offline Tweakie.CNC

*
  • *
  •  7,884 7,884
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Changing computer
« Reply #1 on: June 09, 2015, 02:39:40 AM »
Hi Colin,

Just a few observations...

If you are using the parallel port then you need to have the 32 bit version of Windows 7.
Windows 8 does not support use of the parallel port.
An external motion controller will be required for 64 bit OS versions and/or Windows 8.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: Changing computer
« Reply #2 on: June 09, 2015, 08:36:23 PM »
Hi Colin,
if your chasing Windows 7 32 bit and cant find any, try asking the computer companies(HP,Acer etc) for Windows 7 Commercial systems with parallel ports. Much better quality however most only have std video and turn of UAC otherwise you will have all sorts of bother.

Wes