Hello Guest it is March 29, 2024, 06:28:11 AM

Author Topic: limit and home switches  (Read 2846 times)

0 Members and 1 Guest are viewing this topic.

limit and home switches
« on: April 23, 2007, 07:31:46 AM »
Having just completed building my first cnc router table I now need to install limit and home switches befor I destroy all my hard work.
I am running Xylotex drive, power supply and 269 oz in stepper motors. Any advice on what switches to use, where I can get them and the installation and wiring of the same would be of great assistance.
I have one other silly question: I am able to jog the X & Y axis and have managed to cut a near perfect circle using one of the wizards but how do I jog the Z axis ????
Re: limit and home switches
« Reply #1 on: April 23, 2007, 08:34:21 AM »
any switch will work... I like to use automationdirect.com

and you can jog the Z with the pageUP and page Down buttons

Thanks
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com