Hello Guest it is March 28, 2024, 12:43:43 PM

Author Topic: Need help setting up Camaster CNC in Indiana, need Galil card  (Read 3783 times)

0 Members and 1 Guest are viewing this topic.

We recently purchased a used Camaster CNC router. We knew it needed some work but did not realize to what extent. We are having major trouble getting help/support due to the fact that the machine was built prior to Camaster being bought out by its current owner. So Camaster will offer no support...The Cabinet has the motion control box ICM 2900 but the DMC 1842 card is missing. We are at our whits end with trying to get this machine running and hope someone can help us. We are in Indianapolis and could really use some help!

thanks

alex
Re: Need help setting up Camaster CNC in Indiana, need Galil card
« Reply #1 on: April 16, 2015, 08:05:09 PM »
A single post is all that is necessary .... and this is the most appropriate area.
Thanks,
Russ