Hello Guest it is May 23, 2019, 03:40:09 PM

Author Topic: Dust collector activation with momentary switch  (Read 859 times)

0 Members and 1 Guest are viewing this topic.

Dust collector activation with momentary switch
« on: March 28, 2015, 01:19:58 AM »
Hi,

I was hoping someone would give me a little help with a problem I have. 

I want to activate a remotely controlled outlet that turns my dust collector on an off.  The remote has momentary switches for both the on and off functions.  I have connected these switches to a relay board that is connected to my pmdx-126 board. 

So, my question is, how do I get a m7 call to trigger one relay on the board long enough to fire the remote, then turn that relay back off.  When the call is made to turn the dust collector off, a second relay (the one connected to the off button on the remote) is also momentarily triggered.

Thanks!

Jason