Hello Guest it is November 21, 2019, 04:03:54 PM

Author Topic: Mastercam V9 through X5 Mach 3 Post Processor  (Read 16683 times)

0 Members and 1 Guest are viewing this topic.

Mastercam V9 through X5 Mach 3 Post Processor
« on: January 08, 2015, 11:06:35 AM »
Full credit to "LowryIndustries".

To prevent file duplication, and confusion please navigate here to download: http://www.machsupport.com/forum/index.php/topic,18586.0.html


"It's been a long while since I installed it but it works like a champ.  It's a heavily modified Post file for Mach3 and Mastercam where the mill I am running is an older Bridgeport Boss 6.  The post is just about as perfect as you can ask for and I have been using it weekly if not daily for a couple years now without a problem at all.

It should work for all versions of Mastercam V9 and greater.  I am using Mastercam X5.

And the best thing about this Post Processor is it's entirely generic.  It will work on any standard mill.  It supports tool changes, tool heights, tool wear, flood cooling, etc.

Just download the attached file to (on an XP system):
C:\Documents and Settings\All Users\Documents\shared mcamx5\MILL\Posts  "
Re: Mastercam V9 through X5 Mach 3 Post Processor
« Reply #1 on: February 25, 2015, 08:04:29 PM »
Where is it?

Offline Tweakie.CNC

*
  • *
  •  8,008 8,008
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: Mastercam V9 through X5 Mach 3 Post Processor
« Reply #3 on: March 14, 2015, 08:04:01 AM »
Thanks, I will try it.