Hello Guest it is October 22, 2019, 03:37:08 PM

Author Topic: New POD user has some questions  (Read 6532 times)

0 Members and 1 Guest are viewing this topic.

New POD user has some questions
« on: April 06, 2007, 08:18:22 AM »
Hi all,  I just recieved my POD as part of the Beta Test program and have a couple of questions.  First can someone tell me what type of tool is used to attach wires to the POD, I assume it's some type of "punch down" tool, but what blade do I need-I have the tool but not the right blade. Does anyone know what the max alowable draw on the outputs is? Thanks
Re: New POD user has some questions
« Reply #1 on: April 08, 2007, 08:24:37 PM »
The connectors that come on the board require a special tool and head that cost ~$180.00  (If anyone has other information, please jump in and correct me)

Tyco Electronics makes a crimp style connector that uses a standard crimping tool. (series CST-100-II) Newark, Allied, and Arrow carry these according to Tyco's website.

The part number for the 4 position connector is: 1375820-4
Re: New POD user has some questions
« Reply #2 on: April 10, 2007, 01:27:40 AM »
About a connector.
Firstly I am connected to a prepared connector with direct Handa.
There is a method to substitute in  (I use it for computers) for single headers of 100mil.
« Last Edit: April 10, 2007, 01:34:04 AM by apollonono »