Author Topic: NEED HELP MACH3  (Read 2660 times)

0 Members and 1 Guest are viewing this topic.

Offline kaiolavi56

  • Holding
  • Posts: 2
    • View Profile
NEED HELP MACH3
« on: December 16, 2014, 02:35:57 AM »
I am sorry if this is wrong place to ask help.
Video>>http://screencast.com/t/RVH9sgnoJN

In this video with two stop, and then hold depressions feed, after which the start,
Why it starts to turn the A-axis.
There is not any command to the A-axis.
This is a 5-axis machine.
Kai
« Last Edit: December 16, 2014, 02:40:33 AM by kaiolavi56 »