Hello Guest it is March 28, 2024, 09:03:35 PM

Author Topic: Touch Probe and Touch Plate Help?  (Read 2066 times)

0 Members and 1 Guest are viewing this topic.

Touch Probe and Touch Plate Help?
« on: November 07, 2014, 06:13:07 PM »
so just got my tormach passive probe today, so I turned my cheap probe into a touch plate for TLO.

but the question is how to set to probe height when both probe and touch plate are spring loaded?



the tormach probe gives way before the touch plate.

also the length of the probe will never ever change, it will stay in that tool holder for life, is there a way to set the height so I never have to faff around with touching it on the touch plate?

(No subject)
« Reply #1 on: January 19, 2015, 02:10:44 PM »
Did you ever resolve this?  In fighting the NC and NO prove touch plate issue myself and wondered about this scenario if I used two NC probes how far off it would be.  I imagined a stiffer spring in the touch prove may some but that didn't seen like a great idea for sensitivity and might add deflection to the stylus.

Would love to hear your solutions!

Chris