Hello Guest it is February 02, 2023, 09:08:59 AM

Author Topic: Windows CE.net Operating System  (Read 1742 times)

0 Members and 1 Guest are viewing this topic.

Windows CE.net Operating System
« on: November 02, 2014, 06:32:26 PM »
Hello All,

I was on the hunt for a small footprint motherboard to fit out a new CNC controller when I ran into a compete system in a box and it a fan less type setup.

Anyway I bought one with the idea of using it as it was a complete system that I could pull and arrange as I needed in my box.

The operating system is Windows CE.net.  Can I update this to XP or just reuse it or use CE as the controller software.  Anyone out there accomplished this?

Any suggestions would be appreciated.


Re: Windows CE.net Operating System
« Reply #1 on: November 02, 2014, 09:52:47 PM »
You can try using Windows CE but if you look at the requirements for Mach 3 the OS start at Windows 2000 and run thru Windows 8.1 on a laptop or desktop computer. So I would say no it won't work but doesn't hurt to try.