Hello Guest it is September 26, 2021, 05:26:27 AM

Author Topic: setting up the surfacing wizard  (Read 1336 times)

0 Members and 1 Guest are viewing this topic.

setting up the surfacing wizard
« on: September 22, 2014, 09:28:37 PM »
Hi I'm new to the mach3  and the wizards. the problem I'm having is when I input the clearance of .100 and final depth of .01 and depth of step at .001 the code says that it takes 2 passes at .005 rather than 1 pass at .01 what am I missing?