Hello Guest it is August 15, 2020, 07:52:33 AM

Author Topic: Mach 3 won't load entire g-code?!?  (Read 1435 times)

0 Members and 1 Guest are viewing this topic.

Mach 3 won't load entire g-code?!?
« on: September 06, 2014, 01:55:52 PM »
My cam software will save it all but when I load it into mach3 it won't have but a 3rd of it.

Offline Davek0974

*
  •  2,597 2,597
    • View Profile
    • DD Metal Products Ltd
Re: Mach 3 won't load entire g-code?!?
« Reply #1 on: September 06, 2014, 02:34:03 PM »
Is it licensed?

Think I read somewhere that unlicensed is limited to 500 lines.
Bridgeport Mill, Mach3 V062, CSMIO-IP/A controller, AC Servo Drives.
Plasma table, Mach3 V062, Step motors, C&CNC THC.
Re: Mach 3 won't load entire g-code?!?
« Reply #2 on: September 06, 2014, 02:35:51 PM »
Nope it's the demo. It's like 2500 lines. Guess I'll have patch in at 2500 sets. ..