Hello Guest it is September 16, 2019, 11:19:41 AM

Author Topic: Noob in need of assistance. Home switch issue.  (Read 1622 times)

0 Members and 1 Guest are viewing this topic.

Noob in need of assistance. Home switch issue.
« on: July 26, 2014, 08:45:09 AM »
Good morning. I am setting up M3 with a Gecko G540. I am having an issue with my x and z axis while homing. The M1, M2, M3 lights all illuminate on the diagnostic screen when I manually activate the switches. However when I reference each axis the y is the only one that stops and backs up. The others dont stop I have to hit the e switch. I am using the xml file available from gecko. The link is to the schematic that I used for wiring. Thanks in advance for the help, Doug   


https://dumpyourphoto.com/files4/103013/0XSKAo.jpg

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: Noob in need of assistance. Home switch issue.
« Reply #1 on: July 26, 2014, 04:52:35 PM »
Please attach your xml.
Hood
Re: Noob in need of assistance. Home switch issue.
« Reply #2 on: July 26, 2014, 05:51:09 PM »
I will when I get home from work this evening. Thank you.