Hello Guest it is April 26, 2019, 12:45:29 PM

Author Topic: Is Scaling Supported by Mach4  (Read 1348 times)

0 Members and 1 Guest are viewing this topic.

Is Scaling Supported by Mach4
« on: July 19, 2014, 06:12:17 PM »
When setting a DRO code I noticed there is no entry for scaling.  Is scaling no longer available in Mach 4?

I've used only once or twice since building my machines.  I usually do scaling in CAD.


-Freeman
I'm not a complete idiot...
    there are some parts missing.
Re: Is Scaling Supported by Mach4
« Reply #2 on: July 20, 2014, 06:21:37 PM »
is this what your looking for?

http://www.machsupport.com/forum/index.php/topic,27162.msg193798.html#msg193798

Bingo!  Exactly what I needed.  Thanks.

Hmmm... My screen set I'm using as a vehicle for learning seems to be following yours some what.  Now if I can figure out if tool management is working and how to get the per tool data out of the table to up date my UI, I'll be happy.

-Freeman
I'm not a complete idiot...
    there are some parts missing.