Author Topic: Building LPT board, slow stepper.  (Read 5801 times)

0 Members and 1 Guest are viewing this topic.

Offline dvarius

  • Holding
  • Posts: 1
    • View Profile
Building LPT board, slow stepper.
« on: July 10, 2014, 12:11:05 PM »
Hi,

Is there a way that  Mach3 output in a few LPT  pins a clock, and receive on other pins all steps on this clock rising or falling?

Or something similar to be able to truly control a slow slow stepper.


Thank you.