Hello Guest it is July 08, 2020, 12:59:36 AM

Author Topic: THC Problem( THC Up & THC Down Work like as Jogging)  (Read 1511 times)

0 Members and 1 Guest are viewing this topic.

THC Problem( THC Up & THC Down Work like as Jogging)
« on: July 02, 2014, 02:02:52 AM »
hi to all
i am new user for mach3!
please help me to solve this problem:
i config THC from port & pin menu->input signal -> thc up 12 & thc down 13
and config "allow THC Up/Down control even if not in THC mode" in mill option Tabs.
but when the mach3 stop and THC up/down is active, The Z axis is move!
and when mach3 is running Z axis with THC up/down moved but Z DRO Change!

thanks
Re: THC Problem( THC Up & THC Down Work like as Jogging)
« Reply #1 on: July 04, 2014, 04:31:45 AM »
anyone?