Hi,
I am trying to set up mach3 to do a manual tool change after the M6 command. I want the machine to move to a specific location set by me. I've have the following settings enabled:
1) Under General config: Stop spindle. Wait for cycle start;
2) Under Settings: Ignore tool change, set to off;
3) Under Settings: Tool change location set to X +20 Y +30 Z +10;
When I run my gcode that issues the M6 command my machine doesn't move to the tool change location set by me under settings but it moves to a totally different location. Can anybody tell me how I can set mach3 to move to the tool change position set by me?
Thanks
 

You'll need to modify the M6Start macro to read the toolchange position DRO's, and move to that poosition.