Author Topic: Total axis travel button  (Read 8768 times)

0 Members and 1 Guest are viewing this topic.

Offline Fainya

  • Holding
  • Posts: 1
    • View Profile
Total axis travel button
« on: June 14, 2014, 11:10:10 AM »
I am looking for a way to get the total travel of each axis to the llimit switches.
I am using inch measurements
I already have the XYZ calibrated so that 1.0" is actually 1.0000" +- 0.00001"
I am still learning the G codes. I am new to all of this.