Hello Guest it is March 29, 2023, 09:25:07 PM

Author Topic: fanuc 6m post processor  (Read 5905 times)

0 Members and 1 Guest are viewing this topic.

fanuc 6m post processor
« on: May 16, 2014, 04:16:48 AM »
Hi , I'm fairly new to the 3d cnc and cam process.
I have an xyz 3 axis miller with a prototak controller, instructions say i need a modified fanuc 6m post pocessor. I think I can do the mods myself , instructions seem quite straight forward.
I have an old copy of featurecam (2012) which I'm learning on but it only has one post which doesnt seem to be very compatible with the prototrak.

Could anyone help me out with a suitable post or point me in the right direction to find one.