Build 1762:
http://www.machsupport.com/wp-content/uploads/2014/04/Mach4Hobby%20Installer-1762.exeFix G81 error.
Added G code Vars to the mcRegFile plugin. You can view the G code variables in the Diagnostic Window.
G code variables are saved when Mach 4 is shutdown. Except local vars #1-#34 and global #100-#199. All the rest should be sticky.
File->New for new file creation. (also "Edit G Code" button will edit a new file if there is no file loaded.)
Operator->Jog Trace toggle so that the user can control if Jogs show a trace in the tool path.
Modbus bit packing mod re-inserted into the mcModbus plugin. (it was there and then it wasn't. Not it is back!)
Modbus RS485 check box now does something and it is sticky.
Every GUI control object now has an "Enabled States" property. It allows for the object to easily be enabled/disabled via the machine state.
The clipboard is not destroyed in gcEdit and mcLuaEditor upon exit any more.
If you have modified your screen sets or profiles, make a backup before installing!
Steve