Hello Guest it is December 06, 2019, 08:49:33 AM

Author Topic: reset Button somtimes Hits out  (Read 1420 times)

0 Members and 1 Guest are viewing this topic.

reset Button somtimes Hits out
« on: May 02, 2014, 07:06:13 AM »
hallo, somtimes the reset bitten jumps out on my mach3, so if the mach3 ne is not driving it says something with the trigger. but only if the machine is ständig still.

Offline Hood

*
  •  25,856 25,856
  • Carnoustie, Scotland
    • View Profile
Re: reset Button somtimes Hits out
« Reply #1 on: May 03, 2014, 06:04:00 PM »
Sorry dont really understand what you are meaning, can you try and make things clearer please.
Hood

Offline Davek0974

*
  •  2,580 2,580
    • View Profile
    • DD Metal Products Ltd
Re: reset Button somtimes Hits out
« Reply #2 on: May 04, 2014, 04:20:08 AM »
Are you meaning the reset button on the screen starts flashing red at random times when the machine is idle?

Could be a loose wire in the e-stop circuit or something interfering etc, does it never do it when running?
Bridgeport Mill, Mach3 V062, CSMIO-IP/A controller, AC Servo Drives

Offline Fastest1

*
  •  927 927
  • Houston, TX
    • View Profile
Re: reset Button somtimes Hits out
« Reply #3 on: May 04, 2014, 09:10:55 AM »
You are suffering from a noise condition. Raise the debounce level in the general config page. Not the index debounce.
I want to die in my sleep like my grandfather, not like the passengers in the car! :-)