Hello Guest it is November 22, 2019, 03:24:11 AM

Author Topic: Jog and Teach screen  (Read 2292 times)

0 Members and 1 Guest are viewing this topic.

Offline markn

  •  29 29
    • View Profile
Jog and Teach screen
« on: April 08, 2014, 03:56:19 PM »
Hi Folks,
Is there a way to make a screen where I would jog and test a cut and then record the positions with the teach function.
I have a machine where I would like to position the spindle essentially with a Y and Z axis.