Hello Guest it is July 01, 2025, 07:23:54 PM

Author Topic: Jog and Teach screen  (Read 7807 times)

0 Members and 1 Guest are viewing this topic.

Offline markn

*
  •  29 29
Jog and Teach screen
« on: April 08, 2014, 03:56:19 PM »
Hi Folks,
Is there a way to make a screen where I would jog and test a cut and then record the positions with the teach function.
I have a machine where I would like to position the spindle essentially with a Y and Z axis.

Thanks