Help needed with Mach 3 Driver

Pages: 1 Go Down

0 Members and 1 Guest are viewing this topic.

« on: March 08, 2014, 05:59:49 PM »

I can not get the driver to install in the mach 3 demo mode. Is this normal? Do you need a license to test your machine?

Logged

« Reply #1 on: March 08, 2014, 06:04:46 PM »

Are you using a 64bit OS? If so, you need a 32bit OS to run the Mach3 parallel port driver.

Logged

« Reply #2 on: March 08, 2014, 06:48:50 PM »

Yes I am running a 64 bit

Logged

« Reply #3 on: March 08, 2014, 06:51:18 PM »

Is there anyway I can get the 64 to run correctly

Logged

« Reply #4 on: March 08, 2014, 06:55:11 PM »

No. THe only way to use Mach3 with a 64bit OS is to use an external motion controller, like a Smoothstepper or a UC100.

Logged

« Reply #5 on: March 10, 2014, 07:56:59 AM »

Thanks for the help. Purchased a UC100.

Logged

Pages: 1 Go Up