Hello Guest it is November 05, 2024, 04:40:48 AM

Author Topic: Change height for mach3  (Read 2431 times)

0 Members and 1 Guest are viewing this topic.

Change height for mach3
« on: March 10, 2014, 07:13:34 AM »
Hi!

How can I chnge the height in Mach3?

I'm using Vcarve and it's allways 25.4 for the Z How can I change that so it wont drill straiht in to the board?

Thanks!

Offline ger21

*
  • *
  •  6,295 6,295
    • The CNC Woodworker
Re: Change height for mach3
« Reply #1 on: March 10, 2014, 11:49:20 AM »
You need to change it in V-Carve Pro.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Change height for mach3
« Reply #2 on: March 10, 2014, 07:06:06 PM »
As ger21 said, you need to change your settings in VCarve.
In the toolpaths tab, the first icon is "Setup material and rapid gaps". You can change the retract height there.