Author Topic: Using multiple input lobe  (Read 2913 times)

0 Members and 1 Guest are viewing this topic.

Offline dbcoop11

  • Active Member
  • Posts: 6
    • View Profile
Using multiple input lobe
« on: January 17, 2014, 04:59:02 PM »
On two of my three computers here I cannot select more than one input at a time for the purpose of and/or multiple input lobe. I have tried various things, even reinstalling Mach, but only am able to select one input at a time. Any help would be appreciated, Dave

Offline ptontiger

  • Holding
  • Posts: 2
    • View Profile
Re: Using multiple input lobe
« Reply #1 on: April 04, 2016, 07:57:27 AM »
I'm having the same problem.  Can't select multiple inputs in a brain. Anybody figure this out?  Thanks.

Offline ptontiger

  • Holding
  • Posts: 2
    • View Profile
Re: Using multiple input lobe
« Reply #2 on: April 04, 2016, 11:50:16 AM »
Figured it out.  I had to create a No-operation lobe for each of the inputs I wanted to combine.  Then I could select multiple lobes and create a second level lobe to perform an AND operation.