Hello Guest it is May 22, 2019, 01:21:38 PM

Author Topic: E-STop & Limits Wiring...  (Read 3797 times)

0 Members and 1 Guest are viewing this topic.

Offline Davek0974

*
  •  2,495 2,495
    • View Profile
    • DD Metal Products Ltd
Re: E-STop & Limits Wiring...
« Reply #10 on: January 30, 2014, 01:12:59 PM »
The beast lives :)

wired it all all together today, just temporary lash-up for testing without the torch.

after a little debugging and tweaking motor steps and speeds, it is now running very nicely as a pen plotter :)

better than expected, very fast and accurate so far but will be testing for lost steps tomorrow if I get a chance.

are there any figures to aim for I.e.acceleration G's or mm/sec etc, never having run a CNC anything, it's hard to know what to aim for.
Bridgeport Mill, Mach3 V062, CSMIO-IP/A controller, AC Servo Drives