Hello Guest it is June 24, 2019, 04:25:02 PM

Author Topic: Plasma torch settings via spindle....  (Read 5736 times)

0 Members and 1 Guest are viewing this topic.

Offline Davek0974

*
  •  2,545 2,545
    • View Profile
    • DD Metal Products Ltd
Re: Plasma torch settings via spindle....
« Reply #20 on: January 30, 2014, 01:13:41 PM »
The beast lives :)

wired it all all together today, just temporary lash-up for testing without the torch.

after a little debugging and tweaking motor steps and speeds, it is now running very nicely as a pen plotter :)

better than expected, very fast and accurate so far but will be testing for lost steps tomorrow if I get a chance.

are there any figures to aim for I.e.acceleration G's or mm/sec etc, never having run a CNC anything, it's hard to know what to aim for.
Bridgeport Mill, Mach3 V062, CSMIO-IP/A controller, AC Servo Drives