Hello Guest it is March 29, 2024, 03:56:20 AM

Author Topic: Mill Wizard, Mach3 doesn't see license  (Read 2849 times)

0 Members and 1 Guest are viewing this topic.

Mill Wizard, Mach3 doesn't see license
« on: January 05, 2014, 06:32:41 PM »
Hi,
I'm running Mach3 on my Win7 laptop and just installed NFS Mill Wizard. I seem to be having  a couple of problems.
One, Mach3 keeps telling me that Mill Wizard is unlic., which it's not. If I bring up the Mill wizard it shows my license as good. I tried to put a copy of the lic. in my Mach3 folder as "MillWizardlic.dat" but M-3 still doesn't recognize it.

The other problem I'm having is in Mill Wizard itself. If I start a new job, say a drill pattern, it doesn't show up on the blue screen in Wizard. I tried reloading the program but no good.

Latest version of Mill Wizard as of 1/5/14.

Thanks for your help,
Rob

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mill Wizard, Mach3 doesn't see license
« Reply #1 on: January 06, 2014, 02:56:46 AM »
You would be best asking in the section of the forum for the Mill Wizards as Ron usually monitors that.
Hood
Re: Mill Wizard, Mach3 doesn't see license
« Reply #2 on: January 06, 2014, 08:43:31 AM »
Sorry, I missed that section. I'll do that.
Rob

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mill Wizard, Mach3 doesn't see license
« Reply #3 on: January 06, 2014, 08:56:19 AM »
No problem, just that  Ron will be more likely to see it there.
Hood