Hello Guest it is November 22, 2019, 07:13:59 AM

Author Topic: Jog Pendent  (Read 1954 times)

0 Members and 1 Guest are viewing this topic.

Jog Pendent
« on: December 13, 2013, 05:30:46 PM »
I just installed and configured a MPG2 jog pendent from CNC4PC.  I cant seem to get the pendent to communicate with Mach3.  I installed and enabled the brains and configured per the instructions.   Is there a good way to test weather the LPT2 is working.  The PC device hardware say its good with no conflicts.  I see output #6 is the LED.  However the Led on the pendent is not lit.  Any help would be appreciated. :(
Jude