Hello Guest it is March 29, 2024, 03:06:32 AM

Author Topic: Strange movement behaviour  (Read 6533 times)

0 Members and 1 Guest are viewing this topic.

Re: Strange movement behaviour
« Reply #10 on: December 01, 2013, 12:34:15 PM »
Ok my printer port is def only putting out 3.3V on the Dir pins while jogging. So safe to assume I need that C10 board wouldnt you say?

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Strange movement behaviour
« Reply #11 on: December 01, 2013, 01:49:29 PM »
I can't say for sure that it'll fix the issue. The drive has no manual that specifies the minimum voltage?
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Strange movement behaviour
« Reply #12 on: December 02, 2013, 05:08:47 PM »
I understand Gerry, man I really appreciate all your help, its really great having people such as yourself willing to offer your expertise on this stuff!
You have been a huge help.
I went ahead and ordered the board regardless, I just never have liked the cheapo BOB that came with my kit. Its always seemed like junk to me so whether or not its the only problem its going to be nice to have a better bob anyway.

Thank you!!

Re: Strange movement behaviour
« Reply #13 on: December 06, 2013, 02:52:44 PM »
Good news, I received the new BOB and Im happy, no wait Im ecstatic to report problem solved!! I have nice smooth movement in X and Y. Dont have the Z done yet but should over the weekend.
Thanks to Gerry once again for the assistance, huge help!!

Jim

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Strange movement behaviour
« Reply #14 on: December 06, 2013, 03:19:44 PM »
 ;)
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html