Hello Guest it is March 29, 2024, 09:46:24 AM

Author Topic: Dirty jittery movement on one axis  (Read 5049 times)

0 Members and 1 Guest are viewing this topic.

Re: Dirty jittery movement on one axis
« Reply #10 on: November 10, 2013, 01:57:20 PM »
I did look at the slave axis option, even looked at options to drive two three axis boards from one port. But in the end it was easier and cheaper to get a board that provided enough amps for pairs of motors.

Where should I be looking in the technical data; I must be missing something?

This makes it look easy:
http://youtu.be/Vs2IN45eqAo

A