Hello Guest it is March 28, 2024, 07:27:39 AM

Author Topic: my milltronics partner II - mach3 conversion  (Read 4525 times)

0 Members and 1 Guest are viewing this topic.

my milltronics partner II - mach3 conversion
« on: October 21, 2013, 09:42:11 PM »
Greetings, I am pretty new to the cnc and machinery world,   I picked up a milltronics partner II with the old centronics 4 setup 9x42 table.  I ditched the old centronics equipment and installing the following:

3hp vfd
akz250 usb 4 axis breakout board
3 original dc brushed servos.  (like new)  they have 500cpr a,b,c,z encoders with tach
3 viper 200 servo drives (still have to purchase)

the mill is barely used, original owner made around 8 parts on it and there it sat for years.
im wiring in the spindle brake air solenoid, automatic oiler, and coolant pump.
i am using the encoder z channel for my home positions.

upgrades later will be control pendent,
tool height sensor,
spindle tach wheel,
laser site for homing.
4th axis table