Hey everyone

I cant get my z homeing to work. I have set it up exactly as the x- and y-axis, but for some reason it wont work:(

I have my home switches connected in series to the same indput pin, as shown in this picture:
https://docs.google.com/file/d/0Bx7-mVYEDJpxcUpkOXlSM0RqQ3c/edit?usp=sharing

When I trigger a switch, I can see it in "Port 1 pins current state", and M1Home and M2Home is activated (x- and y-axis). But I get nothing on M3Home (z-axis) as shown in these pictures:
https://docs.google.com/file/d/0Bx7-mVYEDJpxUUJBSjlyNFROZ1E/edit?usp=sharing
https://docs.google.com/file/d/0Bx7-mVYEDJpxaHR0cmNiRTI5bmM/edit?usp=sharing

Is there a bug in my Mach3, or am I missing something?

Pleace help I'm pulling hairs here
Jens Denmark

You do not have the port number set.
Hood

Thanks Hood:) Hopefuly you just solved the last problem before my machine is compleate, and I am a happy man:)