Hello Guest it is May 30, 2023, 08:19:41 AM

Author Topic: Z home - mach bug?  (Read 2051 times)

0 Members and 1 Guest are viewing this topic.

Z home - mach bug?
« on: October 16, 2013, 09:39:54 AM »
Hey everyone

I cant get my z homeing to work. I have set it up exactly as the x- and y-axis, but for some reason it wont work:(

I have my home switches connected in series to the same indput pin, as shown in this picture:

When I trigger a switch, I can see it in "Port 1 pins current state", and M1Home and M2Home is activated (x- and y-axis). But I get nothing on M3Home (z-axis) as shown in these pictures:

Is there a bug in my Mach3, or am I missing something?

Pleace help I'm pulling hairs here ???
Jens Denmark

Offline Hood

  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Z home - mach bug?
« Reply #1 on: October 16, 2013, 10:14:25 AM »
You do not have the port number set.
Re: Z home - mach bug?
« Reply #2 on: October 16, 2013, 10:50:35 AM »
Thanks Hood:) Hopefuly you just solved the last problem before my machine is compleate, and I am a happy man:)