Hi guys, snazzy website now...
Not exactly Mach 3 related, as I have had many years of trouble free use, but you guys have helped me before, so here goes:
Jogging along the x axis, unusually some stuttering, then a 'POP' from the region of the electronics, and no x axis movement.
So i have a look. No light on one Gecko 201. Ah, must be the Gecko? Put a spare Gecko on the connections, still no light. Check the spare Gecko on the same connections as the lit Gecko on Y axis. Lights up. Must be the connections therefore to the x axis Gecko. Put the X Axis connections on the Y axis Gecko 'POP' and no light on the Y axis Gecko either now, although I don't suspect the Gecko's, as they worked on different connections after the POP.
Is this enough info for you guys to tell me what I need at least two new ones of?
James E