Hello Guest it is March 28, 2024, 03:35:16 PM

Author Topic: Instructions for checking stepper mortors  (Read 2011 times)

0 Members and 1 Guest are viewing this topic.

Instructions for checking stepper mortors
« on: July 26, 2013, 10:37:13 PM »
Hey Guys,
Is there a simple instruction check sheet for checking all the necessary checks
to make sure every thing is matched up?
Like the signals coming from printer port to the signals that come out to the motors, and all things in between,
how to use mulit meter which wires to check for, ohms, volts, ect.
and put down on paper for future refer.
1) when you know the power supply rating
2)the size of motors china stuff have non ENGLISH markings
3)Getting into Mach3 and making all the right settings
4) when you have 2motors driving one axis and how to make sure they are set the same, for future refer.
5) on and on I go
I know this is a very long question pick or tell me where to get the info,
 I want to do my own maintenance and learn as I go.

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Instructions for checking stepper mortors
« Reply #1 on: July 27, 2013, 06:54:37 AM »
Don't know of a summary sheet. The problem is that the subject covers a lot of territory. If one were to do a write up
it would just echo so manny things that have been already wirtten.
RICH