Hello Guest it is June 19, 2019, 11:55:35 AM

Author Topic: Mach3 all set up and tuned.....except...another thing  (Read 1340 times)

0 Members and 1 Guest are viewing this topic.

Mach3 all set up and tuned.....except...another thing
« on: July 25, 2013, 03:56:16 PM »
I've downloaded the demo version of  R3.043.066 and am using it to control my CNC lathe.
Started with the Mach3Turn profile and everything works fine except for SINGLE and FROM HERE.
Are these disabled in the demo version?

Offline budman68

*
  • *
  •  2,360 2,360
    • View Profile
Re: Mach3 all set up and tuned.....except...another thing
« Reply #1 on: July 25, 2013, 04:33:41 PM »
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)
Re: Mach3 all set up and tuned.....except...another thing
« Reply #2 on: July 25, 2013, 04:50:27 PM »
Right there in black and white:

•Set Next Line function disabled
•Run From Here function disabled

Thanks Dave

Offline budman68

*
  • *
  •  2,360 2,360
    • View Profile
Re: Mach3 all set up and tuned.....except...another thing
« Reply #3 on: July 25, 2013, 05:35:18 PM »
 :)
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)