My design has a bunch of holes (12 total). I've created the G-code using MeshCAM-5 (build 37) and ran the output through CutViewer and everything looks good.
When I load the file into Mach3 I noticed that only 7 holes show up on the tool path display and when I attempt to run the design it only machines the 7 holes displayed.
All this is on my laptop system running SmoothStepper USB connected to a G540 and a Sherline 2000 mill. Other times one of the 12 holes displays a giant 3" hole (design is 0.51" dia).
Here's the weird thing; if I load the same file on my desktop system everything looks good - can't run anything as I have mill connected to it.
The design file was created using Alibre (GeoMagic) 2013, the G-code was created using MeshCAM-5 (build37) and simulated using CutViewer Mill.
I'm looking for help as I have no clue as to what went wrong.
I've attached a copy of the G-code file and a screen shot showing the weird display.
TIA,
Ken