Hello Guest it is December 08, 2024, 05:15:12 AM

Author Topic: MPG2 connection to the ESS and C22 pendant bob  (Read 2064 times)

0 Members and 1 Guest are viewing this topic.

Offline mvoros

*
  •  141 141
MPG2 connection to the ESS and C22 pendant bob
« on: June 17, 2013, 02:27:22 PM »
Hi All,
Did anybody do the above titled connection. Following the instructions on "The Guide for setting up MPG2/3/4" to the letter, did not make the Mpg work, and now nothing works on my router. There must be more to it than what the guide shows. I wired the drives enable - and + in series, so pressing the estop on the pendant will disengage the drives too. However I didn't connect it to the C22 board as yet, because there is no instruction for that. I really want that Mpg to work. The trouble with people with knowledge is that they cannot conway that knowledge to people like me in a simple way, like a wiring sketch or screen shuts. Any help will be appreciated.
Mike