Hello Guest it is March 19, 2024, 02:14:43 AM

Author Topic: Best Pendant/MPG  (Read 2826 times)

0 Members and 1 Guest are viewing this topic.

Best Pendant/MPG
« on: June 04, 2013, 07:13:20 PM »
Hi Guys, I was wondering what your favourite Pendant/MPG is. I am currently looking at the Tormach one on their website. But am open to suggestions.  Also can someone confirm for me please that the Tormach pendant  will run under Mach3 with no issues please.

Thanks in advance.  ;D
Re: Best Pendant/MPG
« Reply #1 on: June 04, 2013, 07:17:39 PM »
Take a look at the VistaCNC pendants (vistacnc.com).  I've got them on both of my machines (though I completely re-wrote the firmware, and re-defined the functionality).  But, the out-of-the-box functionality is very good, they're very nicely made, and very well supported.

Regards,
Ray L.
Regards,
Ray L.
Re: Best Pendant/MPG
« Reply #2 on: June 04, 2013, 07:22:45 PM »
I use the shuttle pro v2, and so far it seems pretty good and runs great with mach3, loads of buttons for customization through mach3, 2 jogs wheels - 1 for rapid jogging - 1 for increment jogging.