Hello Guest it is August 20, 2019, 01:57:33 AM

Author Topic: Problem loading code  (Read 1623 times)

0 Members and 1 Guest are viewing this topic.

Problem loading code
« on: May 14, 2013, 10:42:12 AM »
Hello,

I'm having problem loading some code from time to time that are being produced by RhinoCam or CamBam, it creates these weird arc that swirls outside of the area like in the photo attached. I have also attached the G-Code for reference.

I updated to the latest stable version of Mach3 R3.043.066 last night but it's still happening. Does anyone know what could be causing these?

Thanks

« Last Edit: May 14, 2013, 10:57:32 AM by boboxx »
Re: Problem loading code
« Reply #1 on: May 14, 2013, 11:11:41 AM »
In General Config, swap the Absolute/Incremental mode IJ setting.

John Champlain

Re: Problem loading code
« Reply #2 on: May 14, 2013, 12:00:44 PM »
Thank you John, that fixed my problem :)

Chris