Hello Guest it is March 28, 2024, 12:27:20 PM

Author Topic: Need post for BOBCAD lathe V24  (Read 3819 times)

0 Members and 1 Guest are viewing this topic.

Need post for BOBCAD lathe V24
« on: March 18, 2013, 09:06:58 PM »
Hi everyone i need a post for BobCad V24 lathe inch and diameter mode, i have tried all i can find no luck yet .
A fanuc post was about as close as i can get but mach still throwing errors .
Thanks Dusty
 

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Need post for BOBCAD lathe V24
« Reply #1 on: March 18, 2013, 09:13:41 PM »
Have you tried BOBCAD ??

(;-) TP
Re: Need post for BOBCAD lathe V24
« Reply #2 on: March 18, 2013, 09:32:33 PM »
Yes, and i am still trying to get a response ,i thought someone might have one that works to try, as i can not get any to work .

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Need post for BOBCAD lathe V24
« Reply #3 on: March 18, 2013, 10:06:46 PM »
Re: Need post for BOBCAD lathe V24
« Reply #4 on: March 18, 2013, 10:59:07 PM »
Thank's i posted in that thread after you sent me the link,we will see if he can help me out and get me going .