Hello Guest it is March 28, 2024, 06:03:14 PM

Author Topic: driver needed for machining webcam  (Read 3415 times)

0 Members and 1 Guest are viewing this topic.

driver needed for machining webcam
« on: March 16, 2013, 02:11:00 PM »
I purchased the machining webcam from CNC4PC, it says to just plug it in and driver will be found. My CNC computer isn't hooked up to the internet... and when I tried to plug it in on another computer I didn't have any luck.

I emailed CNC4PC, no response yet and I'm trying to get this running.

Anyone have a link or a driver I can download? Much appreciated.

http://www.cnc4pc.com/Store/osc/product_info.php?cPath=69&products_id=329
Re: driver needed for machining webcam
« Reply #1 on: March 16, 2013, 04:33:54 PM »
Just enable the plug-in already in Mach3.  It should work.

John Champlain
Re: driver needed for machining webcam
« Reply #2 on: March 16, 2013, 05:05:54 PM »
Do you happen to know what the plugin is called?

I can open the video window in my mach screen... box opens up... but no video is displayed

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: driver needed for machining webcam
« Reply #3 on: March 16, 2013, 07:31:45 PM »
Try pressing Stop camera button then pressing set/start button and see what happens.
Hood
Re: driver needed for machining webcam
« Reply #4 on: March 16, 2013, 08:59:28 PM »
I recently installed a similar unit. Plug n' Play like yours. It wouldn't run.
I had to recycle my USB driver in the Device Mgr., then it worked fine.
Take a look.
Regards,
Russ

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: driver needed for machining webcam
« Reply #5 on: March 17, 2013, 05:32:37 AM »
You may find this thread of interest http://www.machsupport.com/forum/index.php/topic,22932.0.html

Tweakie.
PEACE