Hi Brett,
No id on the card but I found out Its a smoothstepper. My Win 8 PC would not recognise it, so i decided to try an old XP PC and it picked up the hardware straight away (found new hardware "smoothstepper v1.2"). Red and Blue LEDs show on the card as before, but still jog buttons on the virtual pendant do not move the machine in any axis. I do not know how much of the Mach3 software config needs changing specific to the card but certainly defaults + what I have changed (e.g. motor outputs) are clearly not enough to bring it to life, so far.
Planning to use Vectric and maybe Artcam, so I am hoping to get the (newer) PC with Win 8 working with the Router. Though the Win 8 PC will not recognise the smoothstepper, I will try installing the driver that I have just got from a google search.