i added inch/mm but is there a label like Error or Ticker0
so i can see the message. want to be able to tell when it's
inch or mm. right now i have to look at the inch/mm LEDs.
i can see the message in the Error label, but don't want to see
all the error messages in this label, just inch or mm.
Thanks
If getUserLED (1012) Then
SetUserDRO(1010 , GetUserDRO(1010) / 25.4)
SetUserLED(1012,0)
Message " Inch(es)"
Else
SetUserDRO(1010 , GetUserDRO(1010) * 25.4)
SetUserLED(1012,1)
Message "MM"
End If