Hello Guest it is March 28, 2024, 12:53:14 PM

Author Topic: Problems with pop out jog/mpg  (Read 3313 times)

0 Members and 1 Guest are viewing this topic.

Offline dresda

*
  •  220 220
    • View Profile
Problems with pop out jog/mpg
« on: February 03, 2013, 01:40:20 PM »
Jog cycle/ step doesn't increment, if you type in the inc, it will work.
Jog mode no led's but the button works.
MPG led's x & z not working.
They did work before, tried reloading mach 055,066,067
Other functions work.
Did I turn something off by mistake.
Ray.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Problems with pop out jog/mpg
« Reply #1 on: February 03, 2013, 02:51:29 PM »
Standard lathe screenset or modified one?
Go to function configs menu and choose reset device select then restart Mach. Choose parallel port in the options and see if things work fine. If they do then seems like its a DSPMC thing, if they dont then possibly your screenset is corrupt.
Hood

Offline dresda

*
  •  220 220
    • View Profile
Re: Problems with pop out jog/mpg
« Reply #2 on: February 04, 2013, 09:56:32 PM »
Deleted my mach3 and re loaded, tested and the functions worked then loaded my XML and DSPMC then they don't work, can't just load XML file and test because I get an error when trying to enable the system.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Problems with pop out jog/mpg
« Reply #3 on: February 05, 2013, 02:52:02 AM »
Attach your xml and I will have a look here.
Hood

Offline dresda

*
  •  220 220
    • View Profile
Re: Problems with pop out jog/mpg
« Reply #4 on: February 05, 2013, 11:17:34 PM »
Here it is.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Problems with pop out jog/mpg
« Reply #5 on: February 06, 2013, 02:57:33 AM »
Seems to work fine here in simulation by using the parallel port option with your profile. What I did was changed the active state of the  E-Stop and Limits so I could take Mach out of reset. I did notice however you had the Jog Control switched off which meant that you could not choose Continuous or Step Jog. Once Jog Control was enabled it worked fine, that may be your problem. You can turn on Jog Control from Manual screen, Jog On button toggles Jog Control between On/Off.
Hood

Offline dresda

*
  •  220 220
    • View Profile
Re: Problems with pop out jog/mpg
« Reply #6 on: February 06, 2013, 10:25:54 AM »
But I can still use the step or continuous or MPG and they work but the LED doesn't come on so I can't see what mode I am in, same for the MPG X &Z.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Problems with pop out jog/mpg
« Reply #7 on: February 06, 2013, 03:58:46 PM »
It would seem it may have something to do with the DSPMC and the way it handles jogging etc.
Hood